Login
Home

TRIM. Metalworking Fluids. For more than 60 years TRIM® metalworking fluids has lead the industry for all types of cutting and grinding operations. Known worldwide for superior performance, TRIM meets the demands of specialized industries such as automotive, aerospace, and medical parts manufacturers.For the full range of cutting and grinding applications for synthetics, semisynthetics, and soluble oils, TRIM delivers longer tool and sump life, better finished parts, and a better bottom line.
MicroSol. MicroSol® Products. For ultimate performance:TRIM®MicroSol® semisynthetic microemulsion coolants deliver high-performance lubricity and ultimately lowers costs. Achieve precision parts, exceptional tool life, extended sump life, assured regulatory compliance, and greater profitability with the MicroSol product just right for your production.Designed to meet the rigorous demands of the aerospace, medical, automotive, or high production, precision parts manufacturing industries, there's a MicroSol to answer your concerns, ramp up your production, and boost your bottom line.
MicroSol
Emulsions. Emulsion Cutting & Grinding Fluids. Geared up for production:With superior lubricity and a higher oil content, TRIM® emulsions provide a greater boundary layer between the tool and the material. Emulsions are ideal for lower, less than 600 SFPM, applications such as broaching, reaming, deep hole drilling, drilling, tapping, and centerless grinding. Emulsions work well for machining copper, yellow metals, steel alloys, cast aluminums, wrought aluminums, and tough-to-machine titanium and nickel-based alloys.Gear up with the TRIM emulsion designed to meet your production needs.
Emulsions
Semisynthetics. Semisynthetic Cutting & Grinding Fluids. Cutting edge solutions:TRIM® semisynthetics offer the cooling and lubricity of a synthetic without the higher oil content of an emulsion. Designed to operate at higher SFPM, semisynthetics perform well on many operations including face milling, cut-off turning, grinding, tapping, and drilling — depending on the specific product.Semisynthetics are compatible with alloy steels, tool steels, cast irons, copper alloys, as well as plastics and composites. With less carryoff, semisynthetics use less material — it all adds up to lower costs.
Semisynthetics
Synthetics. Synthetics Cutting & Grinding Fluids. Peak your performance:TRIM® clean-running synthetics contain little-to-no oil. They are hard-water tolerant with good corrosion protection. Plus, synthetics leave very low residue for easy cleaning. Paired with extremely low carryoff, synthetics translate to less maintenance and lower operational costs, saving you time and money.Run clean and long with TRIM synthetics.
Synthetics
VHP. VHP® Product (Very High Pressure). Stand up to pressure:TRIM® VHP® (Very High Pressure) fluids perform in high-volume, high-pressure applications with little to no foam. These specialized heavy-duty emulsions (or soluble oils) are used in very high-pressure operations where extreme lubrication is required.VHP soluble oils provide the boundary lubrication necessaryin operations such as creepfeed grinding, drilling, milling, turning, tapping, or roll-form threading of multiple metals.VHP soluble oils leave a soft, fluid film for easy cleaning, and lower maintenance costs.
VHP
Straight Oils. Straight Oil Cutting & Grinding Fluids. Straight to the point-of-cut:TRIM® straight oils, used "straight up", without dilution of water, provide maximum lubricity. Typically used for operations such as Swiss-style screw machines, honing, grinding very difficult-to-machine materials, and gun drilling.Depending on the specific product, some TRIM straight oils are a high-end blend of various base oils; while others contain extreme-pressure additives to control built-up edge and for added tool life.Get straight to the cut with TRIM straight oils.
Straight Oils
High Performance Straight Oils. High Performance, Highest Purity Straight Oils. Tough water white grinding oils:Use TRIM® high purity, high performance straight oils for tough carbide and HSS tool grinding.Utilizing either highly refined hydrocracked base oils, fully saturated esters or a combination of the two ensures very low levels of mist, foam and consumption rates while delivering safe, high flash points. TRIM high performance straight oils provide excellent wheel flushing properties, good friction reduction qualities and workpiece cooling.High purity delivers tough grinding performance.
High Performance Straight Oils
Tapping. Tapping Compounds. Added machinability:With strong friction-reducing properties, TRIM® TAP synthetic and synthetic blend straight oils are made for metals of low machinability. For added lubricity on extremely tough jobs, TAP oils ensure longer tool life, excellent surface finish, and parts size control.All TAP products are compatible with all TRIM coolants.Don't get tapped out — put TRIM TAP fluids to work for you.
Tapping
Honing. Honing Oils. For production honing and superfinishing operations. TRIM® Honing Oils can be used with a variety of work materials and stones.
Honing
Specialty. Specialty Fluids. Specially suited to your operation:TRIM® specialty fluids are specifically tailored to unique needs, such as very high-pressure or high-volume applications, or to address specific code or approval requirements.Whatever your problems or special needs, there is always a TRIM solution.
Specialty
Additives. Cutting & Grinding Fluid Additives. The troubleshooters:As cutting and grinding fluids can start to break down over time, tank-side additives can solve a number of problems. There are TRIM® tank-side additives compatible with most coolants to extend tap and tool life, improve mechanical lubricity, control built-up edge, prevent stained parts, control foam, stabilize the emulsion, and replenish dye.Whatever your problems and concerns, ask your TRIM specialist if a tank-side additive could be the answer.
Additives
Master STAGES. Cleaning & RP Fluids. As effective cleaning and metal protection is essential to attaining precision parts and exceptional surface finish, Master STAGES' products include a full line of parts cleaners, corrosion inhibitors, and maintenance cleaners. Designed for aerospace, medical, automotive, energy exploration, heavy equipment, and general manufacturing production, these products meet stringent requirements to keep customers environmentally compliant, running at peak performance, and more profitable.<br><br>Have health and safety issues? Problems with foam? Rust? Coolant or oily residue on parts? High disposal costs?<br><br>Whether you are a mega-manufacturer or job shop, whatever your production problems and concerns, we have a performance-proven product specifically designed to meet your needs and make the real difference. It's the Master STAGES difference — the right solution for the job at the right price.
Cleaners. Master STAGES? Cleaners & Washing Compounds. For single to multi-stage spray, high-pressure, immersion, and ultrasonics washers, Master STAGES? highly-concentrated cleaners and aqueous-based washing compounds offer long sump life and tramp oil rejection, low foam, low mist, low carryoff, and biostability — many with no EP additives or SARA 313 reportable ingredients. Looking for onestep corrosion protection? Have problems with hard water? Or foam? Looking for cleaner parts at lower cost?<br><br>Cleaning residues from coolant and light oil? Or removing more stubborn grease, heavy oil, drawing compounds,lubricants, waxy soil, oxidation, or rust? For metals ranging aluminum, steels, cast iron, stainless steels, alloys, brass, bronze, copper, to magnesium, there is a Master STAGES cleaner targeted to do the job.<br><br>Master STAGES line of synthetic and semisynthetic in-process sump and central system cleaners dramatically extend coolant life and remarkably reduce downtime.<br><br>And our hard-working maintenance cleaners get the grit and grime from machines, work surfaces, ceramics, plastics, glass, and floors — without harmful, corrosive, chemical compounds. Get it really clean with Master STAGES!
Cleaners
Spray. Spray Alkaline In-process Cleaners. By flooding parts with the chemical cleaner, spray cleaning offers a fast, effective way to remove soil, coolant, and oil residue from a variety of metals, and Master STAGES spray cleaners are specially tailored to do the job quickly, effectively, with less makeup, and no staining of parts. Master STAGES in-process spray cleaners are tough and fast-acting with very low V.O.C. and no SARA 313 reportable ingredients.<br><br>There's a Master STAGES spray cleaner specifically designed for cleaning residues ranging from coolant, light to heavy oil, grease, drawing compounds, lubricants, waxy soil, oxidation, or rust from metals ranging from aluminum, steels, cast iron, stainless steels, alloys, brass, bronze, copper, to magnesium.<br><br>Offering increased life, good tramp oil rejection, low odor, low foam, and low mist, and additional corrosion protection, highly-concentrated Master STAGES spray cleaners produce clean parts while reducing overall costs.
Spray
Immersion. Immersion Alkaline In-process Cleaners. Immersion washers effectively remove residue from light to heavy soils, light rust, coolant, oil, drawing compounds, lubricants, waxy soil, and corrosion inhibitors. Designed for cleaning aluminum, steels, cast iron, stainless steels, alloys, brass, bronze, copper, and magnesium and for multiple-metal situations, Master STAGES highly-concentrated cleaners allow immersion washers to run at lower concentrations and lower temperatures with increased bath life, less foam, and added corrosion protection.<br><br>Environmentally friendly, and free of SARA 313 reportable ingredients, cost-effective Master STAGES immersion cleaners ensure exceptional parts cleaning while using less product and less energy — for a better bottom line.
Immersion
Ultrasonics. Ultrasonic Alkaline In-process Cleaners. Ultrasonic parts washers — widely used in the medical, aerospace, automotive, mining, energy, and precision partsindustries — offer results often far beyond that of traditional cleaning methods. Master STAGES specifically developed ultrasonic in-process cleaners are highly effective in removing dirt, oils, rust, bacteria, grease, drawing compounds, waxy soil, and other contaminants from a wide variety of metals.<br><br>Whether cleaning aluminum, steels, cast iron, stainless steels, alloys, brass, bronze, copper, or magnesium, Master STAGES has the ultrasonic in-process alkaline product to get it really clean.<br><br>Offering exceptional wetting ability, reduced cycle times, longer bath life, and faster, safer precision parts cleaning, yet are environmentally friendly and free of SARA 313 reportable ingredients, Master STAGES ultrasonic cleaners are the cost-effective solution to achieving a matchless surface finish.
Ultrasonics
Maintenance. Maintenance Cleaners. Whether cleaning true grit or light soil from machines, work surfaces, glass, or floors, there's a highly-concentrated, cost-effective Master STAGES cleaner to get the job done and save hours of maintenance. So, don't just get it clean — get it Master STAGES clean!Master STAGES highly concentrated Whamex? sump and central system cleaners for interim and full cleanouts extend sump life, are very cost effective, and greatly reduce downtime.<br><br>All Master STAGES environmentally-friendly products are safe for human contact and free of harmful, corrosive chemicals and troublesome SARA 313 ingredients.
Maintenance
Corrosion Inhibitors. Master STAGES? Corrosion Inhibitors. Nothing is more counterproductive to superior surface finish than corrosion. Highly-effective Master STAGES corrosion inhibitors provide excellent protection on metals ranging from cast iron, steels, and other ferrous metals, aluminum and copper alloys, brass, and bronze with protection ranging from several days to a full 12 months and longer. Whether needing indoor corrosion protection during interim steps of the machining process, long-term outdoor protection, or for shipping parts overseas, there is a Master STAGES product to give you the assurance you need.<br><br>Master STAGES rust preventatives (RPs) can be applied by dip, flood coating, ambient-temperature or heated spraying, roller, or brush, are easily removed — and most are barium-free with low V.O.C. content. Get cost-effective protection you can rely on with Master STAGES RPs.
Corrosion Inhibitors
Synthetics. Synthetic Corrosion Inhibitors. Highly-concentrated and economical, Master STAGES? synthetic corrosion inhibitors leave a thin, water soluble film to provide one-to-two months of rust and oxidation protection. Clean and very low foaming, Master STAGES synthetic corrosion inhibitors are barium-free with very low V.O.C. content.
Synthetics
Emulsions. Emulsion Corrosion Inhibitors. Protect metal parts from rust and oxidation for up to six months with super-concentrated, very economical Master STAGES? emulsion corrosion inhibitors. Barium-free with very low V.O.C. content, environmentally friendly Master STAGES emulsion corrosion inhibitors are built for low-pressure spray, immersion, and dip applications.
Emulsions
Cleaners+RP. Cleaners+RP Corrosion Inhibitors. Master STAGES? CLEAN family of advanced-technology products offer highly effective cleaning and with the same in-process "one-step" method, leave behind an effective, short-term, anticorrosive film.<br><br>Designed for specific metals, desired length of corrosion inhibition, and applications ranging from spray, immersion, ultrasonic parts, and dip tank cleaning, Master STAGES cleaners+RP inhibitors are all highly concentrated and economical, most with low foam and very low V.O.C. content.
Cleaners+RP
Oil/Solvent. Oil/Solvent Corrosion Inhibitors. Master STAGES? oil- or solvent-based corrosion inhibitors, or rust preventatives, are nonstaining, water displacing, and can be used on a wide variety of metals. Whether dipping or spraying, short or long term, there's a very highly concentrated, rugged Master STAGES corrosion inhibitor to give you the protection you need.
Oil/Solvent

Anti-corrosive-en-US.png
Water-Miscible-en-US.png
Expanding-en-US.png
Slideway-en-US.png
Forming-en-US.png
Tube-Drawing-en-US.png
Cutting-en-US.png
Tube-Welding-en-US.png
Grinding-en-US.png
Prelube-en-US.png
VDA-Approved-en-US.png

Drivetrain Components Manufacturer Reduces Coolant Spending by $186K with Master Fluid Solutions ?2020 Master Fluid Solutions. Master Fluid Solutions?, TRIM? and MicroSol? are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-06-18A drivetrain components manufacturer, specializing in automotive torque converters, primarily engages in turningapplications with steel alloy. It operates three large central coolant systems: one at 30,000 gallons, one at 20,000 gallons,and one at 10,000 gallons. There are 100, 50, and 30 machines on each system, respectively. Its primary customers arelarge automotive manufacturers across the United States.THE CHALLENGE THE SOLUTIONTHE RESULTS THE NUMBERSIn addition to the age-old cost reductionchallenges, the components manufacturerwas also faced with sump life and service lifeissues on its machines. Its incumbent fluidresulted in too much foam, smoke in the air,and residue all over the machines.The company decided it was time to reevaluateits entire fluid program to tacklethese issues and reduce the amount ofmetalworking fluid it used. Any fluid it chosewould need to be operator-friendly, as wellas have a long life in the sump. Changing outthe central systems can shut down the entireplant because of the size and number ofmachines connected to them.The components manufacturer brought in three different metalworking fluidproviders to run 60-day tests on its systems. Master Fluid Solutions’ TRIM?SC620 performed well in the test but also offered significant cost savings inthe long run.TRIM? SC620 is a low-foam, semisynthetic coolant that is ideal for high-speedmilling and turning applications. It provides a long service life, long sumplife, and is low-maintenance, which is critical for central systems like the onerunning at the components manufacturer’s facility.Master Fluid Solutions also provided tramp oil removal systems, andcontinuously conducts weekly coolant sampling and laboratory evaluations.Based on the results of these reports, Master Fluid Solutions adjusts thecoolant. Master Fluid Solutions includes this maintenance as a value-add tohelp its customers better manage their coolant usage and spending.After switching over to TRIM? SC620, thecomponents manufacturer saw a massivedecrease in coolant spending, going from$386,000 to $200,000 annually, a 48%savings. Additionally, the company sawa 22% increase in tool life, an improvedsurface finish on the final product, and cleanmachines, without foaming or smoke in theair.Thanks to Master Fluid Solutions, thecomponents manufacturer has achieved itsgoal of cost savings and improved both thework environment and the finished product.? $186,000 saved annually? 48% reduction in coolant spending? 22% increase in tool lifeDrivetrain Components Manufacturer ReducesCoolant Spending by $186K with Master FluidSolutions
$186,000 saved annually
RBC de Mexico Vastly Improves Processes, Cuts Costs with Master Fluid Solutions RBC de Mexico Vastly Improves Processes,Cuts Costs with Master Fluid Solutions?2020 Master Fluid Solutions. Master Fluid Solutions?, TRIM? and MicroSol? are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-06-05RBC de Mexico, RBC Bearings’ Reynosa plant, primarily machines steel and stainless steel for aerospace, automotive, andindustrial customers. The location also handles some aluminum and harder to machine metals, and works on thousandsof different parts and models. RBC de Mexico is a major turning facility owned by RBC Bearings and operates 24 hours aday, seven days a week, for 340 days out of the year, requiring long-lasting, durable coolant.THE CHALLENGE THE SOLUTIONTHE RESULTSAs is the case with a lot of metalworking shops, RBC deMexico wanted to extend sump life, cut coolant costs, andproperly maintain its coolant. Several years ago, the companystruggled with dirty sumps, rust issues, and rancid coolantodors. The sump was full of bacteria and a health risk toworkers. RBC de Mexico wanted a better-quality coolant ata reasonable price, as its incumbent provider was overpricedand not effective.However, the engineering team met with some resistanceinternally when wanting to bring in new vendors to testdifferent fluids. Some were skeptical that a new coolantcould make a difference, and the engineering team had theirwork cut out, not only to prove that there would be ROI fromswitching to a new coolant, but also that a new vendor couldhelp improve RBC de Mexico’s processes.RBC de Mexico began an active search for a new coolant.Ultimately, the plant brought in Master Fluid Solutions. TRIM?MicroSol? 585XT was chosen for its machining operations,and Master Fluid Solutions also provided actionablerecommendations on how to improve conditions on the floor,like installing skimmers on each machine to remove trampoil and using water filters and smog hogs. Master FluidSolutions impressed the team at RBC de Mexico with its deepknowledge of metalworking, and was one of the few vendorswilling to travel to Reynosa to tour the plant, demonstrating thecompany’s commitment to supporting RBC de Mexico duringand after the transition.After almost two years of using TRIM? MicroSol? 585XT, RBCde Mexico has achieved approximately $150,000 in overallsavings, including what it has saved in coolant costs due to thefluid lasting longer in the sump.However, the real value has come in the form of processimprovements that have led to a much cleaner facility. Thesumps are cleaner than ever before, meaning less bacteriaand less health risks for the workers. Installing the skimmershas reduced the amount of tramp oil in the sumps, drasticallyreducing the smoke that would accumulate over the machinesand increasing the life of the sumps — and smog hogs takecare of the rest.RBC de Mexico has had such good results partnering withMaster Fluid Solutions that it now plans to implement acoolant recycling program to save even more money. For theReynosa plant, not only were they able to reduce costs andimprove their operations, but they also found a trusted partnerin Master Fluid Solutions to guide them through the process.“The service and product knowledge from Master FluidSolutions is far superior than anything we had receivedfrom any of the other companies we had talked to. Theirpatience and determination helped everything fall intoplace.”-John Taylor, Engineering Supervisor
$150,000 Saved!
Wilson Tool Finds the Formula for Worker Health & Safety with Master Fluid Solutions Wilson Tool Finds the Formula for WorkerHealth & Safety with Master Fluid SolutionsGlobal custom tooling company Wilson Tool International provides a complete line of tooling productsfor the additive, tableting, stamping, bending, and punching industries. From the louvers on the back of amicrowave to the back panel of a computer server, if a company needs something to stamp out differentforms, Wilson Tool likely makes it.THE CHALLENGETHE SOLUTIONTHE RESULTSWilson Tool provides parts to a wide variety of industries,from automotive to information technology. Parts have to bedelivered to specifications, with very low tolerance for error.Nothing can be delivered with scratches or dents, and fluidsplay a large role in ensuring that Wilson Tool’s productsmeet its customers’ exacting standards.To meet its different metalworking application needs, WilsonTool purchases three different fluids from Master FluidSolutions that can be adapted to different applications.TRIM? OGR 263 is the straight oil solution that WilsonTool uses, along with TRIM? C270 for grinding and TRIM?MicroSol? 690XT.Additionally, worker health and safety can’t be overstated.Employees spend a lot of time in contact with thedifferent fluids for milling, cutting, and other metalworkingapplications. Regardless of whether the fluid is oil-based,water-based, or pure oil, it needs to minimize dermatitiscases.Wilson Tool has dramatically reduced coolant waste anddermatitis cases on its production floor. The company uses8,000-gallon tanks to run coolant through its three systemsand the coolant lasts at least seven years before it needsto be cleaned out and recharged. The most recent systemWilson Tool cleaned out had been running smoothly for 17years. Going so long between system cleanouts meansless waste is created which equates to a savings of roughly$35,000 every time it can be skipped.With 400 people at its St. Paul, Minnesota facility, it’s veryrare that even a single case of dermatitis is reported. Whilecoolant cost and longevity is important, healthy employeeshave a major effect on the bottom line, too.?2020 Master Fluid Solutions. Master Fluid Solutions?, TRIM? and MicroSol? are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-05-07“Master Fluid Solutions built a coolant that we canrecycle and send back through our machines,and all improvements were made by them.We’ve built a good relationship, and they’re animportant partner of ours.”– Duane Berg, Maintenance and Facilities Manager
Coolant Waste Dramatically Reduced
Aerospace Components Supplier Resolves Contamination using Master Fluid Solutions Aerospace Components Supplier ResolvesContamination using Master Fluid SolutionsAs a leading supplier of aerospace components, contamination is a serious problem. One UK-basedsupplier that performs milling, turning, drilling, and tapping operations at its facility had to face suchan issue. This supplier machines aerospace-grade aluminum, with 19 machines in total consisting ofmills, machining centers, and lathes. The aerospace industry requires a precision operation, while alsominimizing downtime for the machines.THE CHALLENGE THE SOLUTIONTHE RESULTSThe aerospace components supplier encountered a problem controllingbacterial contamination in its metalworking fluid. This meant it had to conductregular machine cleans of approximately two to three machines per month. Ittook half a day to clean and refill the machines and the lost machine time cost$76 per hour.The existing metalworking fluid also periodically caused machining issues.The machines would tap oversize holes, which meant those component partswould have to be completely scrapped. Each scrapped component resulted ina $2,330 loss.Weary of losing more moneyand productivity, the aerospacecomponents supplier agreed to asix-week trial of TRIM? E715, run at6% to 10% concentration. TRIM E715is a universal soluble oil that requiresminimal maintenance and is suitablefor machining aluminum, steel andnickel alloys, as well as cast iron andyellow metals.The trial of TRIM E715 resolved the bacterialcontamination issue completely, eliminating the needfor costly cleanouts, a saving of nearly $9,325 per year.Resolving bacterial contamination also removed the badodors that operators frequently complained about. Allmachines have since been switched over to TRIM E715.TRIM E715 also fixed the issue with oversized holes thatresulted in scrapped parts. The aerospace componentssupplier has had no reports of issues since the conversion.And, as a bonus, several operators who suffered fromdermatitis with the former metalworking fluid have hadtheir skin clear up since the switch to TRIM E715.?2020 Master Fluid Solutions. Master Fluid Solutions?, TRIM? and MicroSol? are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-04-16“During the six-week test run, we resolved thebacterial contamination issue, leading to noneed for costly cleanouts since April 2019.”-Machine Shop Manager
Saved Nearly $9,325
Aerospace Components Manufacturer Reduces Consumption with Master Fluid Solutions Aerospace Components Manufacturer ReducesConsumption with Master Fluid SolutionsEven a company with decades in the industry will occasionally struggle with its cutting fluid consumption.A large UK-based aerospace components manufacturer that performs milling, turning, and grindingoperations experienced this firsthand. Their location houses over 100 machines that work with a range ofmaterials, including aluminum, steel, titanium, and Inconel. Along with achieving performance objectives,they also needed to meet local and internal health, safety, and environmental standards.THE CHALLENGE THE SOLUTIONTHE RESULTSPoor coolant stability resulted in a costly and time-consuming regime ofbiocide additions to the majority of the machine sumps at their manufacturingsite. Without the biocide additions, the coolant would not meet regulatoryhealth, safety, and environmental requirements or internal health and safetystandards. The components manufacturer set a coolant life expectation of18 months as part of the planned maintenance clean-out process, but thebiocide was necessary to reach that target.Additionally, machine operators did not like the existing coolant; it emitted abad odor.To deal with this challenge, thecomponents manufacturer activelysought out a product to test in itsmachines to eliminate the needfor additives and improve operatoracceptance. That product was TRIM?MicroSol? 590XT, an environmentallyfriendly,semisynthetic, microemulsionmetalworking fluid.A six-month test run of TRIM MicroSol 590XT proved thatno biocide additions were needed to meet the company’scoolant life expectancy standards. Additionally, usingTRIM MicroSol 590XT reduced consumption. The top-upstrength for its former coolant was 2%, and with TRIMMicroSol 590XT, it was lowered to 1%.Machine operators also accepted the new coolantenthusiastically. They began asking for TRIM MicroSol590XT to be put in all of their machines.The company is currently in a planned conversionprocess with the possibility of the remaining machinesmoving to TRIM MicroSol 590XT. They’re also looking atopportunities to supply TRIM products to the remainingcompanies under their company umbrella.?2020 Master Fluid Solutions. Master Fluid Solutions?, TRIM? and MicroSol? are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-04-16? Top-up strength halved from 2% to 1%? Biocide additions no longer needed? Machine operators requested TRIM MicroSol590XT in all their machines
Reduced Consumption!
Nuclear Components Manufacturer Reduces Consumption by 30% with Master Fluid Solutions Nuclear Components Manufacturer ReducesConsumption by 30% with Master Fluid SolutionsA nuclear components manufacturer produces a wide range of products, including microelectronichardware, radiation monitoring systems, and integrated instrumentation diagnostic systems. Theproduction facilities include everything needed for the full production cycle, from machine processingand printed circuit board production to surface mounting, assembling, welding, and testing. Its primarymetalworking applications are milling, drilling, and turning of aluminum alloys and heat-resistant steelalloys, across approximately 100 CNC machines.THE CHALLENGE THE SOLUTIONTHE RESULTSTHE NUMBERSThe advanced nature of the nuclear components from themanufacturer’s metalworking applications means tighttolerance specifications. However, its existing coolantexhibited poor washing properties, which led to flaws inthe finished product. The product also experienced shortsump life and high fluid consumption, which slowed downproduction.The nuclear components manufacturer agreed to a trialof TRIM? MicroSol? 515 for its metalworking applications.This coolant is a medium to high lubrication, semisyntheticmicroemulsion coolant. TRIM MicroSol 515 isideal for working with mixed metals and aluminum alloysand its translucent emulsion characteristics reduce carryoffto lower costs.The trial period of TRIM MicroSol 515 has been runningfor two years. In that time, the nuclear componentsmanufacturer has doubled its sump life. Additionally,metalworking fluid consumption has been reduced byapproximately 30% and the cost savings overall total 15%.Buoyed by the success of this trial, the nuclearcomponents manufacturer plans to convert all itsmachines to TRIM MicroSol 515.The high quality of TRIM MicroSol 515, combined withMaster Fluid Solutions’ reputation and commitment to itscustomers, has encouraged the company to expand itsproduct usage. Tests of a neat grinding oil and ultrasoniccleaning fluid are underway.?2020 Master Fluid Solutions. Master Fluid Solutions?, TRIM? and MicroSol? are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-04-16? Doubled sump life? 30% reduction in fluid consumption? 15% overall cost savings
15% Cost Reduction
Aircraft Components Manufacturer Reduces Coolant Usage by 50% with Master Fluid Solutions Aircraft Components Manufacturer ReducesCoolant Usage by 50% with Master Fluid SolutionsA U.S.-based aircraft components manufacturer that produces fuselages, pylons, nacelles, and wing elements forcommercial and defense aircraft needed to find ways to improve productivity in their plants and decrease costs. Theyoperate multiple facilities globally and provide critical parts to several well-known aircraft manufacturers.THE CHALLENGETHE SOLUTIONTHE RESULTSTHE NUMBERSThe manufacturer’s existing coolant wasgoing rancid in a very short period of time.Every two to three months, the coolant hadto be completely dumped and replaced. Asa result, each CNC machine required a twohourshutdown for cleaning and rechargingto prevent clogged filters, foul odors, mist andsteam, and tool life failure. With their existingcoolant lifespan averaging three months, evena minimal improvement of coolant life couldprovide significant productivity gains and costssavings.The manufacturer decided it was time toinvestigate new suppliers. It brought inseveral companies, including Master FluidSolutions, to run a seven-month trial of differentproducts, including TRIM? MicroSol? 590XT.This semisynthetic microemulsion coolantis formulated specifically for aerospaceapplications and uses the latest technology toprovide long life and protect sensitive alloys.Because of these unique properties, MicroSol590XT was able to improve sump life and lastlonger in the manufacturer’s machines.In addition, MicroSol 590XT’s existingapprovals from Airbus, Boeing, and otheraerospace manufacturers made it stand outeven more among the competition.Due to the strong positive results from thetrials, Master Fluid Solutions was chosen as themanufacturer’s supplier.During the initial seven-month trial period, the manufacturer did nothave to swap out MicroSol 590XT from any of the test CNC machines.In fact, once all 340 machines were charged with MicroSol 590XT,they were able to use the coolant for 12 to 13 months without havingto clean out the sump, saving an impressive $500,000 in coolantcosts annually.On top of the financial savings from not having to purchase andreplace coolant as often, the manufacturer also achieved additionalsavings through increased productivity. Before, each machine hadto be taken offline to dump, clean, and recharge with coolant everyquarter, taking two hours per machine and causing a loss of 2,720production hours each year. Using an industry standard burden rateof $100 per hour, with MicroSol 590XT, the manufacturer is nowsaving an additional $272,000 per year. Each machine cleanoutalso required at least one maintenance employee for two hours at alabor rate of $40 per hour. By reducing the need for frequent coolantchanges, they yielded an additional $108,000 in savings from laborcosts.For the aircraft components manufacturer, not only did they cuttheir coolant usage in half, they improved productivity by increasingmachine utilization, resulting in substantial cost savings.?2020 Master Fluid Solutions. Master Fluid Solutions?, TRIM? and MicroSol? are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-04-16? 50% reduction in coolant usage? $500,000 saved in coolant costs annually? Coolant life of 12 to 13 months? $272,000 annual cost savings from increased machineutilization? $108,000 in reduced labor costs annually? $880,000 total annual savings
50% Coolant Reduction
Industrial Fluid Solutions Expands Customer Offerings with TRIM<sup>®</sup> MicroSol<sup>®</sup> Products Industrial Fluid Solutions Expands CustomerOfferings with TRIM? MicroSol? ProductsWisconsin-based Industrial Fluid Solutions is a metalworking fluid distributor and fluid maintenanceservice provider that sells to CNC machine shops, die casting companies, mold makers, and heavyequipment manufacturers. Their customers range from small metalworking shops to large equipment andcomponent suppliers in the midwest.THE CHALLENGE THE SOLUTIONTHE RESULTSWhen metalworking companies and manufacturers lookfor industrial fluid, they generally take one of two positions:either they want the best price, or they want the fluid thatoffers the best performance. Most believe these qualitiesare mutually exclusive.Because many of IFS’s customers work in industrieslike automotive and heavy equipment parts, their fluidrequirements are stringent. The products they use mustprevent corrosion, odors, foam, and dermatitis.Industrial manufacturing companies throughout Wisconsinand Illinois turn to IFS for fluid maintenance programs andservices. To meet the needs of their customers, IFS mustprovide them with cutting fluids that not only work great,but also eliminate specific complications like odor and toollife issues — while still being cost-effective.IFS began offering several products in the Master FluidSolutions’ TRIM? MicroSol? product line. These productswere formulated specifically to meet the needs ofmodern manufacturing and have shown great resultsin all industries. It allowed customers the ability tomachine both ferrous and non-ferrous metals at a pricepoint that worked for the customers. TRIM MicroSol’snew technology increases sump and tool life, a definiteadvantage for manufacturing facilities. Additionally, thebiostability and extreme pressure components allowedit to be used in a variety of machining applications,essentially replacing two products with a single solution.For IFS, working with Master Fluid Solutions has providedthe support they need to offer customers both fluids andservices above and beyond their competition. MasterFluid Solutions’ deep understanding of both customer anddistributor needs helps IFS consistently provide highqualityproducts for their customers’ unique applications.In turn, IFS is able to build strong, long-lasting customerrelationships.By switching from two products to one, along withincreased tool and sump life, IFS’s customers have seensavings of up to 30% annually on coolant after switchingto the TRIM MicroSol product family. Additionally, IFS hasconsistently seen Master Fluid Solutions’ products winafter testing in production, increasing customer loyaltyand driving additional revenue.?2019 Master Fluid Solutions. Master Fluid Solutions?, TRIM? and MicroSol? are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-01-23“Working with MFS has been a really positiveexperience. We were able to offer another productline, expand it with different options, and grow ourcustomer base with their support.”– Courtney Green, Service Manager
30% Annual Savings
Signicast Improves Employee Morale with Master Fluid Solutions Signicast Improves Employee Moralewith Master Fluid SolutionsSignicast manufactures precision investment castings for a variety of industries, including firearms,mining and oilfield, recreational vehicles, and aerospace. With three plants located in the United Statesand three in Europe, Signicast can meet the needs of small to large runs of components for a wide rangeof applications.THE CHALLENGE THE SOLUTIONTHE RESULTSBiostability and customer service are the two mainfactors that drive Signicast’s metalworking fluid purchases.The fluid needs to avoid changing colors or developinga bad smell, which can indicate the presence of harmfulbacteria or tramp oil and make for an unpleasant workenvironment for employees. Signicast also wants to knowthat its metalworking fluid provider will provide assistanceif needed.Nonexistent customer service from a previous supplierled Signicast to find a new provider. Its Milwaukee,Wisconsin-area facility uses a 10,000 gallon system, andthe company needed to know that it would get technicalsupport when it had questions about managing its fluid.After evaluating several metalworking fluid suppliers,Signicast chose Master Fluid Solutions and itsTRIM? MicroSol? 585XT for its operations. TRIMMicroSol 585XT does not require extra biocides orfungicides to remain biostable. The District Sales Managerfrom Master Fluid Solutions helped steer Signicast to thecorrect fluid for its machines, was knowledgeable aboutthe product line and metalworking, and was confident thatthe product would work.TRIM? MicroSol? 585XT became part of Signicast’s overallefforts to achieve longer tool life, and it certainly hascontributed to the initiative. The machines are cleaner anddo not have a brown sludge buildup, saving approximately$16,000 per year in its main coolant system.However, it’s Master Fluid Solutions’s customer servicethat has really stood out to the company. When Signicasthas a question about how to improve its shop floor,Master Fluid Solutions is there to provide information.Master Fluid Solutions also sent in its own serviceengineers to assist with discharge, clean, and recharge(DCR) to ensure a proper, thorough and quick process.Additionally, the biostability of TRIM MicroSol 585XThas contributed to happier employees, who no longercontinually have to report problems with the fluid. Thistakes the pressure off the Plant Engineer, who can focuson proactively managing and maintaining equipment onthe shop floor and continue to reap the benefits of thecost savings, turning that toward strategic initiatives.“Master Fluid Solutions isn’t afraid to jump in and getdirty. With them, it’s all about customer service.”– Matthew Speier, Plant Engineer?2019 Master Fluid Solutions. Master Fluid Solutions?, TRIM? and MicroSol? are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-01-22
$16,000 Per Year Savings!
Aerospace Manufacturer’s Holes Per Drill Soar with Master Fluid Solutions Aerospace Manufacturer’s Holes PerDrill Soar with Master Fluid SolutionsAt 30,000 feet, there’s no room for error. Aerospace companies have to meet that high standardwhen they design, manufacture, and support products that keep airline passengers safe in flight.One aerospace components manufacturer based in the Northeast focuses on aerospace propulsioncomponents, flight control components, and aero engine components — all of which require high qualityand precision to meet safety standards and specifications. The company machines a variety of alloys,including low carbon, hardened steel, aluminum, titanium, and nickel, as well as stainless steel, usingdrilling, reaming, tapping, milling, turning, and grinding operations.THE CHALLENGE THE SOLUTIONTHE RESULTSThe aerospace components manufacturer could onlyget six holes per drill on a small drill with its incumbentcoolant. This was not enough and led the company tostart searching for a new coolant that could yield moreholes per drill, as well as increase the life of its tools andreject tramp oil.Coolants used in the aerospace industry must meet thedemands of high-pressure, high-volume applications.The aerospace components manufacturer began testingTRIM? E925AE for these rigorous applications, as ituses a proprietary lubricity package for a better surfacefinish and longer tool life when machining aerospacematerials. TRIM? E925AE protects sensitive aluminum andnonferrous alloys, and its soft fluid film protects chucks,ways, and tool holders.The test run of TRIM? E925AE was a resounding successfor the components manufacturer. TRIM? E925AE yielded96 holes per drill, a 1500% increase. Additionally, partfinishes were excellent, and drilling and reaming sizes,along with turning, milling, drilling, and reaming resultsoverall were very good. Tool life was extended, and TRIM?E925AE rejected tramp oil well. The fluid ran clean in themachine, leaving no residue.For this aerospace company, using TRIM? E925AE hasallowed them to improve production and extend tool life.THE NUMBERS? 1500% increase in holes per drill? 96 holes per drill with TRIM? E925AE vs. 6holes per drill with the previous coolant? Total tooling spend decreased by 90%?2020 Master Fluid Solutions. Master Fluid Solutions?, TRIM? and MicroSol? are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-01-22
Holes Per Drill Up 1500%
Seeing flawless parts and dramatic results with TRIM<sup>®</sup> MicroSol<sup>®</sup> 690XT premium microemulsion. www.masterfluidsolutions.com/na/en-us/?2015-2019 Master Fluid Solutions. TRIM? and MicroSol? are registered trademarks of Master ChemicalCorporation d/b/a Master Fluid Solutions. 2020-01-06TRIM? MicroSol? 690XTCuts to the ChaseHY-SPEED MACHINING GRANTS PASS, OREGONINNOVATIONSFOR LONGER SUMPA N D T O O L L I F EGeneral Manager Mike Mills, Sr.Check out Mike Mills, Sr.’s video testimonial athttps://2trim.us/v/?v=420.For more video interviews from our customers aboutMicroSol 690XT performance, visit our web site at:www.microsol-690xt.comSeeing flawless parts and dramatic results withTRIM? MicroSol? 690XT premium microemulsion.Experiencing huge savings in time and costs.For more than 30 years Hy-Speed Machining has beenproducing quality, precision-machined parts primarily for thecommercial and military aerospace industry.They had tapping issues on their CNC and lathes– having toprogram stops in order to manually add tapping fluid.And to go from water soluble synthetic for aluminum to astraight cutting oil for Inconel?, they had to stop productionand clean the machines to make the switch.They ran a trial on MicroSol 690XT and found dramatic results.They no longer needed to waste time switching from straight oilto coolant to run different metals because the MicroSol 690XTdid it all– whether milling, turning, or tapping 6061 or 7075aluminum, steel, 316 stainless, 17-4, 440C heat-treated stainless,or Inconel.“We ran some tapping tests,” General Manager Mike Mills, Sr.notes. “We went from 2-56, 4-40, 6-32, to 8-32 form taps to tap30 holes each in a block of 6061 aluminum– without any issuesor need for tapping fluid at all– same tap no changes in speedsand feeds. Then “we tapped 17-4 stainless on the lathes with itwithout any extra tapping fluid. MicroSol 690XT has increasedthe life of our taps dramatically, decreased our machine downtime,and improved our production rates.”MicroSol 690XT provided impressive results from the start.First, they ran a small, 100-piece Inconel job. Rather than havingto switch their cutoff tool every 5 pieces, they ran the whole jobwithout changing it. With the flat-bottom, carbide drill going800 thousandths deep, they ran all the parts on one drill –rather than changing the drill for every 10 pieces as in the past.Mills says MicroSol 609XT proved to be “a dramatic improvement,cutting is just incredible, and on that small job alone wesaved about $3,000 on tooling costs.“ And that’s just one job!Additionally, with the switch to MicroSol 690XT, Mills mentionsthat the floors and machines are free of sticky residue and theoperators have had no problems with dermatitis.The switch “saves us a lot over a year,” says Mills. Hy-SpeedMachine continues to run strong with MicroSol 690XT and couldnot be more impressed with the difference to their bottom line.Peak your performance and profits with MicroSol 690XT.
Flawless Parts
TRIM<sup?</sup> MicroSol<sup?</sup> 690XT has produced astonishing results for Hy-Speed Machining www.masterfluidsolutions.com/na/en-us/ ?2015-2019 Master Fluid Solutions. TRIM? and MicroSol? are registered trademarks of Master ChemicalCorporation d/b/a Master Fluid Solutions. 2020-01-06TRIM? MicroSol? 690XTSaves on Toolingand Run TimesHY-SPEED MACHINING GRANTS PASS, OREGONINNOVATIONSFOR LONGER SUMPA N D T O O L L I F ECNC Programmer Mike Mills, Jr.Check out the video testimonial featuring Mike Mills Jr. andothers from Hy-Speed Machining athttps://2trim.us/v/?v=420For more video interviews from our customers aboutMicroSol 690XT performance, visit our web site atwww.microsol-690xt.comTRIM? MicroSol? 690XT has producedastonishing results for Hy-Speed MachiningMaking a big difference to the bottom line.Hy-Speed Machining, an Oregon job shop whose majority ofwork is for the aerospace industry, runs aluminum along withlots of tough-to-machine Inconel? and other aerospace alloys.Having to stop their CNC machines to add tapping fluid to cutchallenging metals was costing them a lot of money—bothin production time and tapping fluid. With a successful trial,they changed the whole shop over to MicroSol 690XT withimpressive results.CNC programmer Mike Mills, Jr. has been amazed at thedifference in production and huge cost savings since theirswitch to premium semisynthetic MicroSol 690XT.Mills sites the new coolant’s performance with a recent jobcutting Inconel, “Since we switched to the MicroSol 690XT, wewere able to increase our surface footage, our speed rates, ourchip loads, and our tool life. We literally get up to six times thetool life that we were getting with the former coolant. On thisone job, we went from 12 minutes per part down to four andone-half minutes—with a tenth of the coolant cost.“With this Inconel job,” he continues, “we use a $450 drill.Before, we were going through four to five of them on the runof 150 parts. With the MicroSol 690XT, we use ONE drill forthe entire run and it’s still good to run more parts! We definitelyhave cut our tool and coolant costs down, sped the run timeup... we are looking at saving thousands of dollars on this job.”That is just one example of the dramatic results they see withMicroSol 690XT day in and day out.“It has really changed our world here at Hy-Speed Machining, ithas been a great success for us,” adds Mike. “MicroSol 690XT hashelped our bottom line tremendously; with the savings on coolant,tooling costs, the time it took to switch out tools, and the faster runtimes, we’ll see savings of hundreds of thousands per year.It’s incredible.”See your profits soar with MicroSol 690XT.
Astonishing Results
Revved-up Performance: Global Automotive Crankshaft Manufacturer Saves Coolant Costs www.masterfluidsolutions.com/na/en-us/Rev-up yourperformance.Have our team of Camshaft/Crankshaft Grinding Expertsbaseline your operation.Call 800-874-0105 todayto improve your productivityPROVEN COST SAVINGSDowntime due to foamingand bacteria was eliminatedand production is up.Application SpecificationsGrinder: Landis Multi-WheelWheel: Norton SGMaterial: powdered metalOperation: journal grindFilter: vacuum paper bedINNOVATIONSF O R L O N G E R S U M PA N D T O O L L I F E?2019 Master Fluid Solutions. Master Fluid Solutions? and TRIM? are registeredtrademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2019-12-05ReOvvveedr -tUhep LPoenrfgo rHmaaunl ceAdditional significant savings were realized by eliminating the need for costly additivesto reduce bacteria and foam levels. C270 reduced oil mist, kept the work environmentcleaner, improved part cleanliness for process gauging, and increased operatoracceptance. Now crankshaft and camshaft production is running smooth with C270.When a world leader in automotive manufacturinghad a problem, TRIM? experts provided the solution.Problem: A global automotive manufacturer’s crankshaft production at one facility fellshort of its 1500 crankshafts per day objective. Analysis proved further production timewas being lost due to foaming and heavy bacterial contamination of a heavy-dutyester-based coolant.Solution: TRIM? C270 proved the perfect solution. Independent testing confirmsC270 dissipates foam 13.9 times faster than the competition, and operates at avery low bacteria level. The automotive manufacturer changed to C270 withdramatic savings in coolant costs, water, filter media use, and downtime.Coolant costs dropped by$36,000 per year.Water consumptiondecreased 40%.Filter media use downover 30%.BBEEFFOORREEWITH TRIM C270BBEEFFOORREEWITH TRIM C270$ $$ $BBEEFFOORREEWITH TRIM C270DOWNTIME COOLANT COST WATER USE FILTER MEDIA72,00036,000
Costs Dropped By $36,000
Zooming Production: Global Camshaft Producer Reduces Filter Media by over 98%
Filter Media Reduced 98%
Excel Manufacturing Boosted their bottom line with TRIM<sup>®</sup> MicroSol<sup>®</sup> 690XT www.masterfluidsolutions.com/na/en-us/ ?2015-2019 Master Fluid Solutions. TRIM? and MicroSol? are registered trademarks of MasterChemical Corporation d/b/a Master Fluid Solutions. 2019-12-03Here’s how TRIM? MicroSol? 690XT semisyntheticoutperformed expectations for Excel ManufacturingMicroSol 690XT saves time and moneyBrad Watts, Makino a81 operator, is thrilled with their change topremium semisynthetic MicroSol 690XT. They had been usingtwo different coolants in their shop, one of which was targetedspecifically at their foaming issues. Now they were looking forone high-performance solution that could do it all. After a threemonthtrial, Excel Manufacturing changed over their whole shopto MicroSol 690XT.They find MicroSol 690XT has provided much better lubricitywith low foam and much less coolant consumption. They hadbeen running their coolant with a high refractometer readingin an effort to address their problem with excessive foam. Nowthey run MicroSol 690XT at half the refractometer reading withno foaming issues at all.Brad Watts attests, “Even with the previous, reliable low-foamcoolant, foam would build up in the reserve wait area sohigh that it coated the drum and caused the machine to gointo a low-coolant false alarm. With the MicroSol 690XT, foambarely builds up, then breaks down quickly without a problem.MicroSol 690XT is going to save us a lot of money... andI’m really excited we got it shop-wide.”Longer tool life and less foam with MicroSol 690XTMaintenance supervisor Curt Metcalf tells us about theirsuccessful three-month testing of MicroSol 690XT. “We testedit on aluminum, cast iron, and ductal iron. It solved a reamingproblem we were having on aluminum, and we saw improvedtool life. Operators like the low chemical smell and the parts aremuch cleaner.”To resolve their foaming issues Curt says they had tried otherquality coolants, even those specially designed to be low-foam.One premium microemulsion did solve the foam problems, butresulted in shorter tool life. With excellent low-foam propertiesand exceptional tool life, Curt says, “MicroSol 690XT does it all!”Boost your profits and production withMicroSol 690XT!View testimonial for Bradford Watts, “MicroSol? 690XT Runs at AboutHalf the Concentration...” athttps://2trim.us/v/?v=419Check out video testimonial “Curt Metcalf Solves Reaming Problemwith MicroSol? 690XT” athttps://2trim.us/v/?v=415For more video interviews from our customers about MicroSol 690XTperformance, visit our web site at: www.microsol-690xt.comTRIM? MicroSol? 690XTBoosted theirBottom LineEXCEL MANUFACTURING OF SEYMOUR, INDIANAINNOVATIONSFOR LONGER SUMPA N D T O O L L I F EMaintenance SupervisorCurt MetcalfMakino a81 Operator Brad Watts
Boosted the Bottom Line
Arkansas Automotive Products Facility Cuts Costs by 30% with Master Fluid Solutions Arkansas Automotive Products Facility CutsCosts by 30% with Master Fluid SolutionsA Heber Springs, Arkansas facility, as part of a global company, focuses on suspension products for theautomotive industry using COBAPRESS?, gravity die casting, low-pressure casting, machining, and assembly.The facility works with aluminum alloy.THE CHALLENGE THE SOLUTIONTHE RESULTSMachine operators handle parts all day that aresaturated in metalworking fluid, and environmental healthand safety for these employees is a big concern for thefacility. Dermatitis not only affects employee morale butalso productivity.Additionally, at a plant like this one, a lot of fluids areused on a day-to-day basis. A significant driver forchoosing fluid is how to lower the cost per piece,which in this case is how much metalworking fluid isused to manufacture one part, measured in gallons ofconcentrate.The facility chose a TRIM? MicroSol? product that hasmoderate to heavy lubricity, as well as low carry off onthe parts. It meets the health and safety standards setby the company, as well as a cleanliness specification toprotect the state-of-the-art machines in the plant.In addition to providing guidance for choosing fluid,Master Fluid Solutions also came on-site to implementservice aspects to better control fluid management.This included weekly fluid sampling and concentrationchecks, as well as training for facility employees. Thisongoing on-site maintenance and education helps themimprove the life of their fluid.The cost savings alone have proven that the TRIM?MicroSol? fluid is ideal for the facility. The company wasable to slash its cost per piece by 30%, a savings ofapproximately $180,000 per year or $540,000 over thethree-year contract signed with Master Fluid Solutions.The facility is also seeing a cleaner working environment.And as a result of the improved metalworking fluidmanagement techniques implemented alongside MasterFluid Solutions, the company has also reduced theneed for service labor and floor maintenance due toequipment failures.Anticipated three-year savings: $540,000 with TRIM? MicroSol?2019-12-02
Cost Per Piece Slashed by 30%
Over the Long Haul: Commercial Truck and Van Engine Manufacturer Eliminated Rust Problem: This manufacturer’s engines are found in virtually every type of commercialtruck and van on the road today, yet they were using an inexpensive local coolant andwere plague with rusting parts and excessive foam. With poor sump life, their 6,500-gallon central system needed to be dumped every three months.Besides reducing overall coolant costs and related downtime, improvements include: nomore rusty parts to rework, reduced oil mist, cleaner parts and work area, and betteroperator acceptance.Solution: They needed a coolant that offered low foaming, long sump life, and rustprotection – TRIM? C270 was the solution. They made the switch and the system hasbeen up and running over eight months without needing to be dumped. Though the localcoolant was one-tenth the cost of C270, the switch to C270 has paid for itself already.www.masterfluidsolutions.com/na/en-us/Is yourcoolant goodfor the long haul?Have our team of Camshaft/CrankshaftGrinding Experts baseline youroperation. Call 800-874-0105 todayto improve your productivityPROVEN COST SAVINGS & PROCESS IMPROVEMENTSAnnualized coolant costs dramaticallyreduced – payback in eight months.Downtime for cleanouts down by 400percent – from quarterly to ZERO.Application SpecificationsGrinder: LandisWheels: Norton vitrified CBNMaterial: cast iron and steelOperation: journal grindFilter: vacuum paper bedC270 did away with rusted partsand costly parts reworks.INNOVATIONSF O R L O N G E R S U M PA N D T O O L L I F E?2019 Master Fluid Solutions. Master Fluid Solutions? and TRIM? are registeredtrademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2019-11-29OvOerv ethre t hLeo nLgo nHga HulaulBBEEFFOORREE12 months8 monthsWITH TRIM C270NoneCLEANOUTS PER YEAREvery 3 monthsANNUALIIZED COOLANT COSTS IIN MONTHSWITH TRIM C270BBEEFFOORREEWhen a worldwide manufacturer of engineshad a problem, TRIM? experts had the solution.RUST LIKE THIS? NEVER AGAIN!COSTS: DOWN CLEANOUTS: DOWN RUST: GONE
Downtime for Cleanouts Down by 400%
Going the distance: Chinese Diesel Engine Manufacturer Improved Sump Life www.masterfluidsolutions.com/na/en-us/?2019 Master Fluid Solutions. Master Fluid Solutions? and TRIM? are registeredtrademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2019-11-26INNOVATIONSF O R L O N G E R S U M PA N D T O O L L I F EApplication SpecificationsGrinder: Landis, SchleifringWheels: vitrified CBNMaterial: steelOperation: journal, lobe grindFilter: paper mediaDoes your coolantgo the distance?Have our team of Camshaft/CrankshaftGrinding Experts baseline your operation.Call 800-874-0105 today to improveyour productivityPROVEN COST SAVINGSEliminated need for costly additivesto control foam and bacteriaNo foaming problems meantno sump pumpout downtimeFOAM DOWNTIMESolution: Starting in 2003, TRIM? C270 was used in a group of existing Landisgrinders. Impressive results led to C270 replacing other coolants throughout theplant. When new Schleifring grinders were installed, C270 was their fluid of choice.Problem: This Chinese diesel engine manufacturer needed to improve their overallcamshaft/crankshaft grinding process and reduce costs. They’d used both anexpensive, high-tech, semisynthetic coolant and a less expensive local blend; bothhad problems with foam and short sump life.Having eliminated foaming, the need for additives, and having improved sump life,the manufacturer now uses C270 exclusively in their entire grinding process — over100 machines of various sizes.Going the DistanceWhen a global engine and parts manufacturerhad a problem, TRIM? experts had the solution.
Improved Grinding & Reduced Costs
Don’t get it SIMPLY clean, get it Master STAGES? REALLY clean! A customer using Simple Green askedfor a cleanabilty analysis of SimpleGreen versus Master STAGES. Usingthe LAB/TECH SERVICE Test MethodsSection 906, Master Fluid Solutionsprofessional chemists conducted blindhead-to-head tests of Master STAGESCLEAN F2 and Task2 Grime Fighteragainst Simple Green IndustrialCleaner and Degreaser.The results speak for themselves. BothMaster STAGES CLEAN F2 and Task2Grime Fighter remarkablyoutperformed Simple Green incleaning various machine shop soils.and have cleaner machines, parts,and workplace with Master STAGES.Save money and maintenance timeNOTHING BUT THE FACTS.Chlorinated OilHydraulic OilSulferized OilUsed Motor OilMetalworkingFluid ResidueMaster STAGESCLEAN F2TEST RESULTS at 5% product dilution with waterMaster STAGES Simple GreenTask2 Grime FighterMake it easy to boost your bottom line –with Master STAGES.Test procedures: Steel test strips were submerged in mixtures of chlorinated, hydraulic,sulfurized, and tramp oils to replicate standard machine shop soils, cured for 24 hours, thencleaned with the respective cleaners. Products were tested with 5%,10%, and 20% dilutionsof deionized water and tested at 50°C for five minutes. Product performance was similar atall dilutions per the above chart (10% and 20% dilution results not shown for lack of space)and IN NO TEST DID THE SIMPLE GREEN OUTPERFORM the CLEAN F2 or Task2 Grime Fighter.www.masterfluidsolutions.com/na/en-us/?2019 Master Fluid Solutions. Master Fluid Solutions? is a registered trademarks of Master Chemical Corporation d/b/a Master FluidSolutions. Master STAGES? and Task2? are trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2019-10-16= Completely Cleaned = Mostly Cleaned = Partially CleanedIt’s that SIMPLE. Master STAGES? Task 2?and CLEAN F2? out clean Simple Green.The proof is in the CLEAN!Don’t get it SIMPLY clean,get it Master STAGES? REALLY clean!Completely Cleaned Mostly Cleaned Partially CleanedINNOVATIONSF O R L O N G E R S U M PA N D T O O L L I F E?
REALLY Clean!
Ace Manufacturing of Cincinnati, Ohio | TRIM<sup>®</sup> MicroSol<sup>®</sup> 690XT Raised the Bar on Productivity www.masterfluidsolutions.com/na/en-us/ ?2015-2019 Master Fluid Solutions. TRIM? and MicroSol? are registered trademarks of Master ChemicalCorporation d/b/a Master Fluid Solutions. 2019-09-24TRIM? MicroSol? 690XT produceddramatic results for Ace ManufacturingAce Manufacturing of Cincinnati, Ohio had been runninganother coolant with far less than desired results. They wereexperiencing multiple problems: ”tap break and a real terribletool life”, along with problems with foam, shop uncleanliness,rust on machines, and foul odor. Within weeks of beginningtheir trial of MicroSol 690XT on three CNC machines, theyreported tool life was dramatically improved. Highly lubriciousMicroSol 690XT was keeping the machines lightly oiled,rust-free, and definitely cleaner without any residue build up.Tapping into fluid savings - and bonuses -with MicroSol 690XTAce supervisor Chuck Adams says, ”We’re losing a lot of coolantbecause it was foaming out of the side of the tanks, especiallythe two Morey’s with the high-pressure units. We were losing15 to 20 gallons a week just from overflow. Since we havechanged to MicroSol 690XT, we have no foam at all! Ouroperators like the pleasant odor and the shop environment iscleaner. We’re changing the entire shop over to MicroSol 690XT.””We were having a lot of tap wear and tap breaks trying totap titanium,” Chuck testifies. ”After putting in MicroSol 690XT,tapping is much better, lubricity much higher, we’re having lessfailure, and our taps are lasting a lot longer. We are not shuttingdown to change tools as often, so we exceeded our productiontarget and got our bonus this past quarter!”MicroSol 690XT, the problem solverAce Manufacturing’s CNC operator Phil Smith couldn’t bemore impressed with MicroSol 690XT’s performance. Philreports “Since we have switched to using MicroSol 690XT, ithas eliminated all my rust issues, all of my tapping and toolingbreakage problems, all the odor issues, and all of the foamingissues! It has been a great coolant!”Let MicroSol 690XT put you at the top of the pack!Check out our MicroSol 690XT customer video testimonials at:https://2trim.us/v/?v=416Chuck Adams, Machining Titanium with MicroSol? 690XThttps://2trim.us/v/?v=417Chuck Adams, Tapping into Fluid Savings with MicroSol? 690XThttps://2trim.us/v/?v=418Chuck Adams, Wants to Convert Whole Shop to MicroSol? 690XThttps://2trim.us/v/?v=414Phil Smith, Eliminates Tool Breaking Issues with MicroSol? 690XTTRIM? MicroSol? 690XTRaised the Baron ProductivityACE MANUFACTURING OF CINCINNATI, OHIOINNOVATIONSFOR LONGER SUMPA N D T O O L L I F ECNC Operator Phil SmithSupervisor Chuck Adams
Tool Breakage Problems Eliminated
TRIM<sup>®</sup> MicroSol<sup>®</sup> 690XT Raised the Bar on Cleanliness www.masterfluidsolutions.com/na/en-us/ ?2015-2019 Master Fluid Solutions. TRIM? and MicroSol? are registered trademarks of Master ChemicalCorporation d/b/a Master Fluid Solutions. 2019-09-24Ace Manufacturing enjoys keeping it cleanwith the switch to TRIM? MicroSol? 690XT.When Ace Manufacturing of Cincinnati, OH switched toMicroSol 690XT shopwide, here is what Shop Supervisor ChuckAdams reported...“after just the first couple weeks, the insideof the machines, way covers, and jigs are rust free and themachines are definitely a lot cleaner. It keeps the inside of themachines lightly oiled with a light film, but there is no discolorationor residue buildup.”Chuck continues, “With the MicroSol 690XT, we have virtuallyno residue in our machines. The operators like the coolant alot better because it keeps their machines clean and they don’thave to work hard cleaning the parts after machining. Not onlyare the parts themselves cleaner, but the smell’s better and theworkplace is cleaner.”Choose MicroSol 690XT:> highest lubricity MicroSol product formarkedly longer tool life and superior finish> exceptional foam control, low carryoff> dramatically extended sump life forsubstantial savings on time and material> soft aqueous film protects parts, keeps machines clean> multimetal, multi-operation versatility> superior corrosion inhibition onferrous and nonferrous metals> nonchlorinated; no nitrates, triazine, phenol, orsulphurized EP additives> no need for tank-side biocides or fungicides> boron- and halogen-freeUse MicroSol 690XT especially for:> steel, stainless steel, copper, titanium andaluminum alloys, and most composites> high-pressure, low-foaming operationsKeep it really clean with MicroSol 690XT!INNOVATIONSFOR LONGER SUMPA N D T O O L L I F ETRIM? MicroSol? 690XTRaised the Baron CleanlinessACE MANUFACTURING OF CINCINNATI, OHIOTypical semisyntheticleaves sticky residue.TRIM MicroSol 690 XTkeeps machines clean!Check out our MicroSol 690XT customer video testimonials at:https://2trim.us/v/?v=416Chuck Adams, Machining Titanium with MicroSol? 690XThttps://2trim.us/v/?v=417Chuck Adams, Tapping into Fluid Savings with MicroSol? 690XThttps://2trim.us/v/?v=418Chuck Adams, Wants to Convert Whole Shop to MicroSol? 690XThttps://2trim.us/v/?v=414Phil Smith, Eliminates Tool Breaking Issues with MicroSol? 690XT
Very Clean Machines

MCC-Office-512x512at300.jpg - Office
Office
tech-support-512x512at300.jpg - Technical Support
Technical Support
CoolTools-icon-512x512at300.png -
Great-Place-To-Work-512x512at300.jpg - Great Place to Work
Great Place to Work
California-Transparency-Compliance-512x512at300.jpg - California Transparency Compliance
Send-A-Sample-512x512at300.jpg - Send A Sample
Send A Sample
blog-512x512at300.png -
LinkedIn-512x512at300.png -
instagram-512x512at300.png -
Twitter-512x512at300.png -
facebook-512x512at300.png -
YouTube-512x512at300.png -

TRIM ? Videos

10 Reasons to test TRIM? MicroSol? 455

2019-01-04, US-English

To share this video, copy this URL: https://2trim.us/v/?v=425.0

Download video >



Total Cost of Coolant

2018-10-30, US-English

To share this video, copy this URL: https://2trim.us/v/?v=424.0

Download video >



Video clip of Clyde A. Sluhan

Video clip of Clyde A. Sluhan, from "Miracle at Point of Cut", "Problem solving is our value in your operation. Research to reality, applied chemistry in metal removal. At Master Chemical, this is the working idea for progress."

1965-00-00, US-English

To share this video, copy this URL: https://2trim.us/v/?v=5.1

Download video >



Three Steps to Extend Your Coolant Life

2017-03-08, US-English

To share this video, copy this URL: https://2trim.us/v/?v=423.0

Download video >



Preparing your sump for a holiday shut-down

Preparing your sump for a holiday shut-down can save you the aggravation of foul odors in the shop when you return to work.Follow these 3 simple steps to ensure your sumps are ready for an extended period of time away.

2016-11-22, US-English

To share this video, copy this URL: https://2trim.us/v/?v=422.0

Download video >



TRIM® MicroSol® 590XT

My name is Charles Davis, Jr., with C & R Machine. We are trying the new MicroSol 590XT. We're running it in some 12L14 for some conveying system rollers.With 590XT I am getting better surface finishes, better insert life compared to my older coolant which was an oil based coolant, a lot less maintenance with this coolant compared to the oil based and it mixes well and stays mixed, where I always had separation before with the oil based coolant.That's where we're running it pretty hard um like I said we are still seeing better tool life, I haven't seen any of the speeds and feeds from what I always ran before, still running the same, we're getting a little bit better tool life.With the 590XT we are seeing a lot better surface finishes, the chips are coming out a lot nicer, parts are coming out nicer, and cleaner, a lot less time to clean parts up after they are machined, this is a single op where we just de-burr it and dry the parts off and they go into the box, from there.

2015-11-24, US-English

To share this video, copy this URL: https://2trim.us/v/?v=421.0

Download video >



Tools last longer cutting Inconel® with TRIM® MicroSol® 690XT

Watch the video to find out what everyone at Hy-Speed Machining has to say about MicroSol 690XT!Michael Mills,General Manager,Cutting Inconel: "Tools lasted a lot longer, parts came out better."Mike Mills Jr.,CNC Programmer,Cutting Inconel: "I went from twelve minutes a part to about four and a half minutes."Taylor Cooper,CNC Operator,"The coolant is tenfold to what we've been using"Weston InKrote,CNC Operator,"Tooling life went up, run time cut in half, finishes were great"Peter Duffy,Maintenance,"More profit for us"

2015-04-14, US-English

To share this video, copy this URL: https://2trim.us/v/?v=420.0

Download video >



Phil Smith Eliminates Tool Breaking Issues with MicroSol® 690XT

Phil Smith, Ace Manufacturing Company, Cincinnati, Ohio, states, "Since we have switched to using MicroSol 690XT coolant, it has eliminated all my rust issues, all of my tapping and tooling breakage issues, all the odor issues, and all of the foaming issues. MicroSol 690XT has been a great coolant."

2014-12-05, US-English

To share this video, copy this URL: https://2trim.us/v/?v=414.0

Download video >



Curt Metcalf Solves Reaming Problem with MicroSol® 690XT

My name is Curt Metcalf and I work at Excel Manufacturing in Seymour, Indiana. We have been testing MicroSol 690XT for about three months now on two different machines with good success. We have tested aluminum, cast iron, and ductal iron. It solved a reaming problem we had on an aluminum machining operation and and gave us good tool life. The operators like it because of the low chemical smell and the parts come clean.

2014-12-05, US-English

To share this video, copy this URL: https://2trim.us/v/?v=415.0

Download video >



Chuck Adams is Machining A Lot of Titanium with MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio, stated, "Our shop is starting to machine a lot of titanium products. In order to prevent micro fractures in the metal, we wanted a coolant that was nonchlorinated. With the MicroSol 690XT we achieved that purpose and also cut down on tap breaks. We were having a lot of tap wear and tap breaks trying to tap titanium. After putting in the 690XT the tapping is much better, lubricity is much higher, we’re having less failure, and our taps are lasting a lot longer!"

2014-12-05, US-English

To share this video, copy this URL: https://2trim.us/v/?v=416.0

Download video >



Chuck Adams Tapping into Fluid Savings with MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio noted, "Prior to using MicroSol 690XT we were using $150 to $200 every two weeks on tapping fluid aerosol cans on all the machines. Now that we are using the TRIM coolant we don’t use any other tapping product. It is now just straight coolant with no problems."

2014-12-05, US-English

To share this video, copy this URL: https://2trim.us/v/?v=417.0

Download video >



Chuck Adams Wants to Convert Whole Shop to MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio, stated, "After trials with the MicroSol 690XT in three of the machines, we wanted to buy the product. Three to four weeks after cleaning the machines we were having better machining. The product was not available at the time of the trial, so we changed the rest of the shop over to 685XT, which we are currently running. As soon as 690XT goes into production, we are changing the entire shop over to 690XT."

2014-12-05, US-English

To share this video, copy this URL: https://2trim.us/v/?v=418.0

Download video >



Bradford Watts, "MicroSol® 690XT Runs at About Half the Concentration..."

Bradford Watts of Excel Manufacturing in Seymour, Indiana says, "MicroSol 690XT runs at about half the concentration level as our older style coolant. We have used less of the 690XT in the machines and that has saved us a lot of money. MicroSol 690XT keeps the tools as clean as the old product. MicroSol 690XT is probably the best coolant that we have had in my time here; and I have been here almost ten years."

2014-12-05, US-English

To share this video, copy this URL: https://2trim.us/v/?v=419.0

Download video >



Machine Talk: A Handy Guide to a Clean Machine

You'll like ";Hank" and "CJ." They may not sound like experts, but they know how to cleanmachines — inside and out. And while they won't bore you with the process, they don't skip any steps,either. As a result the 2002 edition of Master fluid Solutions' Machine Cleaning video is instructive,slightly irreverent and completely unorthodox. You'd better request your copy — now!

2002-03-15, US-English

To share this video, copy this URL: https://2trim.us/v/?v=367.0

Download video >



The Effect of hard Water on Coolant Filtration

The effect of hard water on the filterability of water-soluble coolants.

1991-02-01, US-English

To share this video, copy this URL: https://2trim.us/v/?v=200.0

Download video >



YELLOW BELLIED SUMP SUCKER

Fast-paced program with music and a professional narrator who highlights features and benefits of the entireYellow Bellied Sump Sucker line. With studio and in-shop pictures. Supported with computer graphics throughout.

1985-03-01, US-English

To share this video, copy this URL: https://2trim.us/v/?v=29.0

Download video >



Conservation

This video traces Master Fluid Solutions' development of Coolant Recycling as an effort to conserve natural resourcesand preserve the environment. This leads into a computer graphic and video overview of how coolant recycling works with our XYBEX® Recycling Equipment. This brief, narrated program with music is a"must see" in gaining an introduction to coolant recycling.

1987-05-01, US-English

To share this video, copy this URL: https://2trim.us/v/?v=57.0

Download video >



XYBEX® System 1000 Centrifuge, Cleaning and Maintenance

This professionally narrated program demonstrates the maintenance procedures for the Westfalia OTB2 Centrifuge on the XYBEX 1000. Demonstrations included: removal and cleaning of the bowl,changing of the gear case oil and replacement of the clutch drive linings.

1990-06-01, US-English

To share this video, copy this URL: https://2trim.us/v/?v=134.0

Download video >



XYBEX®System 1000 Operation and Maintenance

(Overview with Dave Semersky) A walk around overview of the operation and integration of theXYBEX System 1000 and twin compartment Yellow Bellied Sump Sucker. Stresses the importanceof deionized water and coolant concentration control. Serves as an introduction for the Operation andMaintenance video modules of the XYBEX System 1000.

1990-05-01, US-English

To share this video, copy this URL: https://2trim.us/v/?v=177.0

Download video >



Dustin McCallum Speaks About TRIM® VHP® E814

Dustin McCallum of TUMAC, Inc. speaks about how they were able to change their machining processes because of TRIM VHP E814. They are now able to roll tap instead of cut tap. They also were able to keep tools from degrading during their very long and complex cutting which meant that they could meet their clients surface finish requirements.

2011-02-18, US-English

To share this video, copy this URL: https://2trim.us/v/?v=411.0

Download video >



No Rust. One Fluid.

TRIM MicroSol 585XT Solves High-tech Manufacturers Problems!

Gabriel Escobar, Shop Manager, of HELI-TECH is pleased to speak about how MicroSol 585XT allowed him to convert HELI-TECH's entire shop from two types of coolants to just one. He finds it much more convenient to have just one coolant. MicroSol 585XT solved rusting issues and his high-pressure application needs!

2011-01-24, US-English

To share this video, copy this URL: https://2trim.us/v/?v=410.0

Download video >



Concentration Control of Cutting and Grinding Fluids by Using a Refractometer

This is a funny and educational video to help people who use cutting and grinding fluids (commonly called coolants) to machine metal using large milling or grinding-type machines. The video has two characters, Clark is the machine operator and Devin is the TRIM? representative who helps Clark understand how to take care of the cutting fluid in his sump so that he gets better tool life and avoids rust and odor issues.

Starring:
Clark M. Callis
Devin O. Sizemore

Special thanks to Misco for the use of one of their Palm Abbe? Digital Refractometers and to Owens Community College for the use of their machine shop.Special thanks to Misco for the use of one of their Palm Abbe Digital Refractometers and to Owens Community College for the use of their machine shop.

2010-07-09, US-English

To share this video, copy this URL: https://2trim.us/v/?v=409.0

Download video >



Superior Metalworking with Low-foaming TRIM® MicroSol® 585XT

Greetings, this is Mark Scherer, from Master Fluid Solutions, with a visual demonstration of how we significantly improved the low foaming characteristics of one of our TRIM cutting fluids.On the left is TRIM MicroSol 585, while on the right is our new TRIM MicroSol 585XT, an extended-life, nonchlorinated semisynthetic metalworking fluid.Both products are mixed using a standard kitchen mixer and at exactly five minutes the mixer is stopped. Notice how quickly the foam completely dissipates from our new MicroSol 585XT. It only takes seven seconds, compared to fourteen seconds for the original MicroSol 585.For more information about MicroSol 585XT and other cutting fluids, please visit our website www.masterfluidsolutions.com.

2009-10-20, US-English

To share this video, copy this URL: https://2trim.us/v/?v=408.0

Download video >



Master STAGES ? Videos

Machine Talk: A Handy Guide to a Clean Machine

You'll like ";Hank" and "CJ." They may not sound like experts, but they know how to cleanmachines — inside and out. And while they won't bore you with the process, they don't skip any steps,either. As a result the 2002 edition of Master fluid Solutions' Machine Cleaning video is instructive,slightly irreverent and completely unorthodox. You'd better request your copy — now!

2002-03-15, US-English

To share this video, copy this URL: https://2trim.us/v/?v=367.0

Download video >



Turn Your Machine Cleaning Downtime Into Uptime With Whamex XT?

Whamex has an excellent reputation for easy, fast, and productive machine sump and coolant system clean outs. Whamex can be added to machines utilizing emulsion or semisynthetic coolants and will start cleaning the sump while parts are still being cut. However, when used with pure synthetic coolants, Whamex is difficult to use while still cutting parts; it can create a lot of foam. As part of our Master STAGES? surface treatment product line, we are introducing low-foaming Whamex XT. Production time is now increased for machine sumps filled with synthetic coolants -- parts can be cut while the cleaning process begins!The new Whamex XT cleans just as well as the original. In this side-by-side drip demonstration, on the left is the original Whamex. On the right, is the new Whamex XT. Both are cleaning the purple-dyed, typical semisynthetic coolant equally well.

As for foam, even under extreme agitation which is validated by this mixer test, a mixture of the new Whamex XT and a typical synthetic coolant is breaking foam as quickly as the beater is creating it. And when the agitation is stopped, any foam in the new Whamex XT breaks immediately. This demonstrates the low-foaming characteristics of Whamex XT and how machine-cleaning downtime can be turned into uptime!

Contact your Master Fluid Solutions distributor today to start benefiting from the amazing new low-foaming machine-cleaning technology -- Whamex XT!Category:EducationTags:Machine Cleaning low-foaming coolants semisynthetic synthetic emulsion cut cutting surface treatments Maintenance Whamex Whamex XT productive system sump process uptime

2011-07-21, US-English

To share this video, copy this URL: https://2trim.us/v/?v=412.0

Download video >



XYBEX ? Videos

Preparing your sump for a holiday shut-down

Preparing your sump for a holiday shut-down can save you the aggravation of foul odors in the shop when you return to work.Follow these 3 simple steps to ensure your sumps are ready for an extended period of time away.

2016-11-22, US-English

To share this video, copy this URL: https://2trim.us/v/?v=422.0

Download video >



Machine Talk: A Handy Guide to a Clean Machine

You'll like ";Hank" and "CJ." They may not sound like experts, but they know how to cleanmachines — inside and out. And while they won't bore you with the process, they don't skip any steps,either. As a result the 2002 edition of Master fluid Solutions' Machine Cleaning video is instructive,slightly irreverent and completely unorthodox. You'd better request your copy — now!

2002-03-15, US-English

To share this video, copy this URL: https://2trim.us/v/?v=367.0

Download video >



YELLOW BELLIED SUMP SUCKER

Fast-paced program with music and a professional narrator who highlights features and benefits of the entireYellow Bellied Sump Sucker line. With studio and in-shop pictures. Supported with computer graphics throughout.

1985-03-01, US-English

To share this video, copy this URL: https://2trim.us/v/?v=29.0

Download video >



Conservation

This video traces Master Fluid Solutions' development of Coolant Recycling as an effort to conserve natural resourcesand preserve the environment. This leads into a computer graphic and video overview of how coolant recycling works with our XYBEX® Recycling Equipment. This brief, narrated program with music is a"must see" in gaining an introduction to coolant recycling.

1987-05-01, US-English

To share this video, copy this URL: https://2trim.us/v/?v=57.0

Download video >



XYBEX® System 1000 Centrifuge, Cleaning and Maintenance

This professionally narrated program demonstrates the maintenance procedures for the Westfalia OTB2 Centrifuge on the XYBEX 1000. Demonstrations included: removal and cleaning of the bowl,changing of the gear case oil and replacement of the clutch drive linings.

1990-06-01, US-English

To share this video, copy this URL: https://2trim.us/v/?v=134.0

Download video >



XYBEX®System 1000 Operation and Maintenance

(Overview with Dave Semersky) A walk around overview of the operation and integration of theXYBEX System 1000 and twin compartment Yellow Bellied Sump Sucker. Stresses the importanceof deionized water and coolant concentration control. Serves as an introduction for the Operation andMaintenance video modules of the XYBEX System 1000.

1990-05-01, US-English

To share this video, copy this URL: https://2trim.us/v/?v=177.0

Download video >



Concentration Control of Cutting and Grinding Fluids by Using a Refractometer

This is a funny and educational video to help people who use cutting and grinding fluids (commonly called coolants) to machine metal using large milling or grinding-type machines. The video has two characters, Clark is the machine operator and Devin is the TRIM? representative who helps Clark understand how to take care of the cutting fluid in his sump so that he gets better tool life and avoids rust and odor issues.

Starring:
Clark M. Callis
Devin O. Sizemore

Special thanks to Misco for the use of one of their Palm Abbe? Digital Refractometers and to Owens Community College for the use of their machine shop.Special thanks to Misco for the use of one of their Palm Abbe Digital Refractometers and to Owens Community College for the use of their machine shop.

2010-07-09, US-English

To share this video, copy this URL: https://2trim.us/v/?v=409.0

Download video >